SUPREMA DX612 MACHINE FEATURES
The new DX Series is now constructed with an Independent Frame/Tank Design which separates the machine frame, ways and drive system from the worktank so machining accuracy is not affected by large or heavy workpieces. The 4-sided stainless steel construction of the worktank with a full 10mm thick steel bottom provides years of low maintenance service.
The Gantry Style Movement System travels the extra rigid box constructed X-Axis Bridge on a set of LM guides driven by dual Mitsubishi Brushless AC Servo Motors and high-pitch 40mm double anchored ball screws for unmatched positioning accuracy.
20 Inch “I” Beam Construction provides unmatched frame stability with a machined top surface that mounts the LM guides for the X-Axis Bridge.
High-Speed Rapid Positioning of up to 787 inches per minute, made possible through the low backlash planetary gearbox, reduces positioning time between cutting profiles.
Laser Compensation of all machine axes provides the highest degree of positioning accuracy in the business. Machine accuracy with compensation is within ±0.002” per 36” length.
Auto-Lubrication System provides automatic way and ball screw greasing/self cleaning that takes the hand work out of machine lubrication.
Table Slat Registration Rails can be adjusted to provide a flat mounting surface for the galvanized table slats providing a truly flat working surface.
Dual Layer Protection insures proper focus tube height and collision detection. A fully programmable touch probe checks workpiece height in several different modes, from manual to continuous, maintaining the proper focus tube to workpiece distance. The Collision Detection Ring stops all machine movement in X, Y, and Z should a collision occur preventing any damage.
4-Axis Intelligent Taper Control (ITC) provides full 360º taper control by adding a one or two degree mechanical tilt to the cutting head, compensating for the jet getting wider as it exits the focus tube. This provides improved part wall straightness of ±0.001” per ½” of workpiece thickness. The software automatically generates the ITC program by just one click.
High Pressure Intensifier Pump is the world famous KMT S-50, 50 HP pump providing 60,000 PSI of water traveling up to MACH 2 with 1.09 GPM of water consumption through a maximum orifice size of 0.013.” The reciprocating hydraulic piston to ceramic water piston ratio is 20:1, pushing the water into an accumulator that maintains a smooth even flow to the cutting nozzle.
Abrasive Removal System uses a 300 GPM water circulating system in the worktank that suspends the exhausted abrasive and pumping it through a cyclone system that separates the water and returns it to the tank. The used abrasive is collected in a filter bag lined hopper for easy disposal.
M720 Series Control now offers a 15” waterproof flat LCD touch screen monitor, IP65F environmental resistance keypads and mouse designed with ease of use in mind (Ergonomics). Utilizing Windows XP Operating System, 256MB of RAM and a 20GB hard drive, there is plenty of room and power to handle even the largest of job challenges. Easy to use menu list and help functions guide the operator through both programming and workpiece setup.